Συχνά Λάθη με τη χρήση του glo™ και πώς να τα αποφύγεις

glo ™ heated tobacco devices feature advanced technology, capable of offering each user a fully satisfying experience with each use. At the same time, to optimize the performance of the device, it is essential to use it correctly, avoiding "mistakes" that could compromise its functionality. In this in-depth analysis, let's see what are the seven things you should do when using a glo™ heated tobacco device .

1 – Wait a while before using the device again

To start a session, you must first press the button and wait for 3 seconds to activate, respectively, the Standard mode or the more intense Boost mode. In the first case, the device is ready for use in 20 seconds, while in Boost mode it takes only 15 seconds. Before starting to use the device, it is necessary to wait for the 4 LED lights to light up and for the second vibration of the device.

2 – Replace the glo™ tobacco stick properly after each use.

Once the session is complete, the wand must be removed and replaced if the device is to be used again. To perform this step correctly, you must wait at least 10 minutes after the end of use to allow the device to cool completely.

3 – Use compatible consumables designed for use with glo™ devices

Only neo™ , veo™ and Lucky Strike sticks whose shape is compatible with the dimensions of the heating chamber can be placed in glo™ devices . Therefore, other sticks or, even worse, traditional cigarettes, are not suitable for any glo™ device .

4 - Close the protective cover after each session

The heating chamber of glo™ devices is closed with a special mechanism (snap-on or sliding, depending on the model). The cover must be closed at the end of each session to prevent damage and to prevent dirt and debris from entering the device through the socket.

5 - Clean the heating chamber of the glo™ device regularly

To maintain an optimal level of functionality of the device, it is recommended to clean the heating chamber of the device regularly. After letting the device cool down, it is a good idea to open the lower inlet and dry any moisture residue with a clean, dry cloth. Then, using the glo™ cleaning brush, you can clean the heating chamber from both ends.

These operations do not have to be performed with every use, but it is recommended to remove residual moisture after every five full sessions and to clean the device with the cleaning brush after every 20 sessions. The cleaning brush should then be cleaned using running water and dried carefully - before re-use.

6 – Do not use glo™ devices in very low or very high temperatures

This error can damage the battery and reduce its overall lifespan. Any overheating or insufficient heating problems are signaled by the corresponding LED - in case of an anomaly of this type, it is best to avoid using the device, note the error indicated in the instruction booklet and contact the service

customer service for technical assistance via email ( info@discoverglo.gr ) or by calling the toll-free number 800 500 1450.

7 – Do not remove the glo™ stick too soon after the session

At the end of the session, the stick may still be too hot to remove safely. For this reason, we recommend waiting a while for the device to cool down completely and allow you to remove the stick without any problems.